SAILTEC's Forespar Katalog 2015 - page 24

22
HOYT JIB BOOM™, ROLL-X STABILIZER, SPRIT KIT
HOYT JIB BOOM
Perfect Wing & Wing Trim of Your 100% Self-Tacking Jib
As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom™
maintains precise control of the jib’s leach. This results in remarkable performance
improvement and ease of handling.
Sail More Easily & Efficiently
Proven on Over 1,000 Boats and
Trans-Oceanic Passages
Knuckle Boom Tube Suggested
Part# Model No. Tube Dia Weight Length Length
Maximum J Yacht LOA Base Dia “A”
313101 250
2.5” OD 16lbs
2.25”
6’
10’
25’ - 29’
7”
14”
313102 300
3.0” OD 24lbs
2.50”
11’
13’
30’ - 35’
7-3/4”
17”
313103 350
3.5” OD 37lbs
2.75”
13’
17’
35’ - 42’
8-3/4”
21”
313155 Universal Wedge (SOLD IN PAIRS)
KNUCKLE
PEDESTAL
Universal Swivel Insures
Proper Leach Twist.
BOOM
“A”
23˚
BASE
“The Hoyt Jib Boom™ is one of the best
cruising innovations I have seen or used”.
Ken Read • Vice Pres. North Sails
The typical base placement (center of the pedestal base) is 10% aft of the headstay.
This is not a critical location, but rather a “Rule of Thumb”. Various obstacles can
obstruct the pedestal base position.
All knuckles are bent to 57 degrees. All pedestals are set at 23 degrees. All angles
are calculated on a perfectly flat and level deck. Wedges will be required on many
installations to make up for deck camber. A universal black molded urethane wedge
which can be cut to fit is available from Forespar
®
CLEW PLUG
Self Tacking Upwind
Self Vanging Downwind
White Powder Coated Base
Up and Downwind Jib Control Based on a
Simple & Effective Principle
Leach Twist Perfectly Trimmed Downwind
HOYT JIB BOOM MODELS
MULTIHULL SPRIT KIT
The Roll-X Flopper Stopper limits the rocking
and rolling of a rough anchorage. Exclusive
baffle design provides superior stability.
Articulating Sprit Adds Downwind Sail Functionality
to Multihulls. This sprit kit can be fitted to most
multihulls to allow for use of reaching spinnakers
and drifter sails.
Part #
Boat Length
305301
Roll-X Stabilizer
305302 3“ x 11’2” Pole Kit for Boats to 40’
305303 3 1/2” x 14’ Pole Kit for Boats to 55’
305304
NEW
Roll-X Storage Bag
Part # Boat Length
305003 3” x 4’ for 25-35 foot boats
25’-23’
305004 3-1/2” x 5’ for 36-42 foot boats 36’ to 42’
305005 4” x 6’ for 43-50 foot boats 43’ to 50’
Can be Quickly Deployed and Removed
Stainless Steel and Aluminum Construction
Professional Installation Recommended
Increases Downwind Performance
Can be used with Continuous Line
Furling Systems
Professional Installation Recommended
ROLL-X FLOPPER STOPPER
Removable Anchorage Stabilizer
1...,14,15,16,17,18,19,20,21,22,23 25,26,27,28,29,30,31,32,33,34,...56
Powered by FlippingBook